1. Home
  2. AGRICULTURE
  3. FLOTATION 331
  • ALLIANCE
  • AGRICULTURE

FLOTATION 331

I-3
B

Alliance 331 Heavy Duty Flotation tread design is basically a traction profile with good self cleaning characteristics suitable for on/off road agricultural service on tractors, cross country vehicles, trailers and agricultural implements. High load carrying capacity and low inflation pressure are the main characteristics of this tire. Strong nylon construction and compounds ensure long tire life. Some sizes feature special compounds or steel belts for superior performance as required by the application.

  • Traction
  • Load Carrying Capacity
  • Roadability
  • Soil Protection
send Send an enquiry
  • Alliance flotation 331 tire

    Images

  • Video

  • Blogs

Tire Sizes

IMPLEMENT

FORESTRY

EXCAVATOR

AGRI TRANSPORT

ARTICULATED DUMP TRUCKS

FORESTRY TRAILER

EXCAVATOR - 600/40-22.5 Steel Belted

WEAR RESISTANT COMPOUND WEAR RESISTANT COMPOUND
FLOTATION FLOTATION
TL
TUBE LESS
Size Rim Unloaded Dimension Loaded Static radius
mm		 Rolling Circumference
mm		 Load Index
PR
Symbols		 Inflation Pressure
bar		 Recommended Load
Speed
SW
mm		OD
mm		Static
kmph		10
kmph		15
kmph		20
kmph		25
kmph		30
kmph		35
kmph		40
kmph		50
kmph
600/40-22.5 Steel Belted 20.00 DC 600 1100 505 3356
6957089907710731069006500615058005220
Size Rim Unloaded Dimension Loaded Static radius
mm		 Rolling Circumference
mm		 Load Index
PR
Symbols		 Inflation Pressure
bar		 Recommended Load
Speed
Excavator Application
SW
mm		OD
mm		Static
kmph		10
kmph		15
kmph		20
kmph		25
kmph		30
kmph		35
kmph		40
kmph		50
kmph
600/40-22.5 20.00X22.5 600 1090 515 3436
6957089907710731069006500615058005220
    1)When tires equip vehicles subject to haulage cyclic high load variations excluding transport application on long distances, i.e. vehicles used on round trips (e.g. from field to farm) where on one way the vehicle is empty & on the other way the gross vehicle mass exceeds two times the mass of empty vehicle (last two rows in the table). 2) Load for intermediate speed should be taken as an average between two close speeds 3) Load at lower speed than 10km/h may be similar to the load for 10km/h 4)Steel Belt available in 173A6/169A8 only.1)When tires equip vehicles subject to haulage cyclic high load variations excluding transport application on long distances, i.e. vehicles used on round trips (e.g. from field to farm) where on one way the vehicle is empty & on the other way the gross vehicle mass exceeds two times the mass of empty vehicle (last two rows in the table). 2) Load for intermediate speed should be taken as an average between two close speeds 3) Load at lower speed than 10km/h may be similar to the load for 10km/h 4)Steel Belt available in 173A6/169A8 only.

*The images used above are 3D representations. Actual tire may vary.
NA - Not Applicable Data

send Send an enquiry

Also See

Remove All Compare 4