• ALLIANCE
  • AGRICULTURE

328

I-3
A8/B

Alliance 328 Flotation tire is a specially designed tire constructed to carry heavy loads and is used in harsh conditions. It provides improved stability over dual-tire configuration. The tire also provides much better ride comfort, higher machine mobility, better self cleaning and better overall performances on road. 328 comes in Steel Belted, Fabric and Heavy Duty variants for different sizes. Test description.

  • Roadability
  • Soil Protection
  • Traction
  • Load Carrying Capacity
  • Alliance 328 tire

    Images

  • Video

  • Blogs

  • Testimonials

IMPLEMENT - 700/50-26.5

FLOTATION FLOTATION
TL
TUBE LESS
Size Rim Unloaded Dimension Loaded Static radius
mm
Rolling Circumference
mm
Load Index
PR
Symbols
Inflation Pressure
bar
Recommended Load
Speed
Drive wheelFree rolling
SW
mm
OD
mm
10
kmph
25
kmph
40
kmph
50
kmph
10
kmph
25
kmph
40
kmph
50
kmph
700/50-26.5 24.00DC 700 1333 580 3948
12PR
1.551904410371033407290620052104690
1.653904580385034707570644054104870
1.857804910412537108120690058005220
2.582707020590053109740828069606260
16PR
259805080427038408430716060205420
2.263105370451040608920758063705730
2.466505650475042809380797067006030
3.3951080806790612011260956080407240
    Highlighted rows indicate cyclic high load variations. 1) When tires equip vehicles subject to haulage cyclic high load variations excluding transport application on long distances, i.e. vehicles used on round trips (e.g. from field to farm) where on one way the vehicle is empty & on the other way the gross vehicle mass exceeds two times the mass of empty vehicle (last two rows in the table). 2) When fitted on tractor steering wheels load capacities are 80% of free rolling and inflation pressure 20% higher. 3) For 10 KM/H and stationary use inflation pressure raised 20% and 25% respectively. 4) Load for intermediate speed should be taken as an average between two close speeds 5) Load at lower speed than 10km/h may be similar to the load for 10km/h1) When tires equip vehicles subject to haulage cyclic high load variations excluding transport application on long distances, i.e. vehicles used on round trips (e.g. from field to farm) where on one way the vehicle is empty & on the other way the gross vehicle mass exceeds two times the mass of empty vehicle (last two rows in the table). 2) When fitted on tractor steering wheels load capacities are 80% of free rolling and inflation pressure 20% higher. 3) For 10 KM/H and stationary use inflation pressure raised 20% and 25% respectively. 4) Load for intermediate speed should be taken as an average between two close speeds 5) Load at lower speed than 10km/h may be similar to the load for 10km/h

*The images used above are 3D representations. Actual tire may vary.
NA - Not Applicable Data

send Send an enquiry