• ALLIANCE
  • CONSTRUCTION & INDUSTRIAL

MULTIUSE 550

R-4
D

550 MULTIUSE pattern is used in agricultural applications because of its versatile tread design. Specific block tread design enables high performances on snow-covered as well as on sandy terrains. A basic directional lug design, divided by separated blocks, provides a good grip on soft surfaces. In addition, a high number of blocks and rubber-to-void tread ratio enables long tread wear life and low rolling resistances during transport operation on hard surfaces. Uniform ground pressure distribution and tread wear are provided by steel belted carcass structure. In addition, steel belts give the most efficient puncture protection.

  • Roadability
  • Driving Comfort
  • Soil Protection
  • Traction
  • Tire Life
  • Duty Cycle
  • Load Carrying Capacity

INDUSTRIAL TRACTOR - 480/65R24

STEEL BELTED STEEL BELTED
WEAR RESISTANT COMPOUND WEAR RESISTANT COMPOUND
TL
TUBE LESS
Size Rim Unloaded Dimension Loaded Static radius
mm
Rolling Circumference
mm
Load Index
PR
Symbols
Inflation Pressure
bar
Recommended Load
Speed
Constant loadCyclic Applications
SW
mm
OD
mm
Static
kmph
10
kmph
25
kmph
30
kmph
40
kmph
50
kmph
65
kmph
10
kmph
15
kmph
480/65R24 DW15L, DW14L, DW16L 480 1240 562 3726
0.8352019101670161015301460133026002370
1.2446024302110205019401850169033003010
1.6529028802510243023002200200039103570
2603032802860276026202500228044504060
2.4672036503180308029202790254049604530
2.8734039903480337031903050277054204940
3.2794043103760364034503290300058705350
    1)For stationary service (0 km/h) and speed up to 10 km/h inflation pressure must be increased by 20%. 2) Field dual: 88% of field load, field triple: 82% of field load. 3) Recommended rim in red. *Alliance allows for Free Rolling[FR] application: Load capacity to be increased by 20%, after increasing the inflation pressure by 20%. * Alliance recommends to increase inflation pressure in front tires up to 0.5 bar with heavy front loads * For cyclic service, driving with full load should not exceed 1 km involving low torque. Note - If needed, spikes/studs can be inserted, according circle markings on thetread.  

*The images used above are 3D representations. Actual tire may vary.
NA - Not Applicable Data

send Send an enquiry